Product area

Portable dry powder fire extinguisherabc1

Graphic
Detail

Portable dry powder fire extinguisherabc1

Portable dry powder fire extinguisher is filled with dry powder fire extinguishing agent (main components and content: ABC-75% ammonium dihydrogen phosphate+15% ammonium sulfate), which has good fluidity, strong anti caking properties, non-toxic, odorless, non-conductive, and can be stored for a long time.
This product is suitable for extinguishing Class A fires caused by ordinary solid materials such as wood, paper, and cloth; Class B fires involving flammable liquids such as gasoline, kerosen

product details
Technical Parameter

1. Purpose:

This product is suitable for extinguishing Class A fires caused by ordinary solid materials such as wood, paper, and cloth; Class B fires involving flammable liquids such as gasoline, kerosene, diesel, methanol, etc; Class C fires involving combustible gases such as coal gas, natural gas, methane, and acetylene; Initial fires such as Class E fires caused by the burning of charged objects.

The product has passed the vibration test and can be used on vehicles.

2. Installation and operation

A fire extinguisher equipped with a spray hose must be screwed to the outlet of the fire extinguisher valve before use, and it is required to be tightened without looseness to ensure good sealing. When installing the cable tie, pay attention to the opening end facing the back of the nameplate.

It is recommended to place the fire extinguisher inside the fire extinguisher box.

When using, lift the fire extinguisher to the scene, stand in the upwind position, pull out the safety pin, aim the nozzle of the fire extinguisher at the root of the flame, press down the handle, and sweep from near to far, left and right, until the fire is extinguished. When extinguishing a Class B fire, it is not allowed to directly aim the spray at the liquid surface to prevent the impact force of the spray from splashing flammable liquid and expanding the fire.

Temperature range: -20 ℃~+60 ℃.

3. Maintenance and upkeep

The fire extinguisher is filled with driving gas, and safety must be taken into account. Do not collide during transportation and storage; It should be placed upright in a clean and dry environment, pay attention to moisture prevention, and strictly prohibit direct sunlight exposure to prevent metal corrosion, plastic and rubber aging.

Regular inspection is required. If the pressure indicator pointer is found to be below the green area, refilling should be carried out; Once used, even if the fire extinguishing agent does not spray much, it must be refilled; Fire extinguishers should undergo their first maintenance after 3 years of use, and must be repaired every 2 years thereafter. Before refilling, it should be done

Only after passing the 2.1MPa water pressure test can it continue to be used. After the experiment, it should be dried in a timely manner and the inner and outer surfaces should be inspected. If severe corrosion is found, it should not be used again.

Please read the 'Maintenance Manual' for refilling the fire extinguisher.

4. Reminder

The product comes with a one-year warranty. If any leakage is found without any changes to the lead seal or other components, our company is responsible for repairing it.

Please read the 'Maintenance Manual' for the repair of fire extinguishers.

5. Warning

Do not use it upside down.

Only applicable for extinguishing live equipment with a voltage not exceeding 1000V at a distance of 1m.

Next : Portable dry powder fire extinguisherabc2

Copy product links

Long by picture save/share

INQUIRY

在线询盘 MORE+

联系人 *
手机 *
描述
Submit

Security Code

Refresh the code

Cancel

Confirm

Inquiry Content：

You have no items to require

Add Successfully

Continue To Visit Inquiry Now