Product area

Wheeled dry powder fire extinguisher MFT/ABCE50

Graphic
Detail

Wheeled dry powder fire extinguisher MFT/ABCE50

Wheeled dry powder fire extinguisher is filled with dry powder fire extinguishing agent (main components and content: ABC-75% ammonium dihydrogen phosphate+15% ammonium sulfate), which has good fluidity, strong anti caking properties, is non-toxic, odorless, non-conductive, and can be stored for a long time.
This product is suitable for extinguishing Class A fires caused by ordinary solid materials such as wood, paper, and cloth; Class B fires involving flammable liquids such as gasoline, keros

product details
Technical Parameter

1. Purpose:

This product is suitable for extinguishing Class A fires caused by ordinary solid materials such as wood, paper, and cloth; Class B fires involving flammable liquids such as gasoline, kerosene, diesel, methanol, etc; Class C fires involving combustible gases such as coal gas, natural gas, methane, and acetylene; Initial fires such as Class E fires caused by the burning of charged objects. Widely used in furniture factories, chemical plants, libraries, docks, mining areas, oil depots, boiler rooms, and warehouses, it is a commonly used fire extinguishing equipment.

2. Installation and operation

Wheeled fire extinguishers should be placed on a clear and easily accessible flat surface, and should not be placed on steps. The fire extinguisher shall not slide on its own without external force.

When using, push the fire extinguisher to the scene, stand in a suitable upwind position, pull out the safety pin, remove the nozzle, open the valve, extend the hose, aim the spray gun at the root of the flame, press on the spray gun switch, and sweep from near to far, left and right until the fire is extinguished. When extinguishing a Class B fire, it is not allowed to directly aim the spray at the liquid surface to prevent the impact force of the spray from splashing flammable liquid and expanding the fire.

3. Maintenance and upkeep

The fire extinguisher is filled with driving gas, and safety must be taken into account. Do not collide during transportation and storage; It should be placed upright in a clean and dry environment, pay attention to moisture prevention, and strictly prohibit direct sunlight exposure to prevent metal corrosion, plastic and rubber aging.

Regular inspection is required. If the pressure indicator pointer is found to be below the green area, refilling should be carried out; Once used, even if the fire extinguishing agent does not spray much, it must be refilled; Fire extinguishers should undergo their first maintenance after 3 years of use, and must be repaired every 2 years thereafter. Before refilling, it should be done

Only after passing the 2.1MPa water pressure test can it continue to be used. After the experiment, it should be dried in a timely manner and the inner and outer surfaces should be inspected. If severe corrosion is found, it should not be used again.

Please read the 'Maintenance Manual' for refilling the fire extinguisher.

4. Reminder

The product comes with a one-year warranty. If any leakage is found without any changes to the lead seal or other components, our company is responsible for repairing it.

Please read the 'Maintenance Manual' for the repair of fire extinguishers.

5. Warning

When using a fire extinguisher, attention should be paid to safe operation.

Only applicable for extinguishing live equipment with a voltage not exceeding 1000V at a distance of 1m.

Previous : Wheeled dry powder fire extinguisher MFT/ABCE35 Next : Cart type carbon dioxide fire extinguisher MTT/BE10

Copy product links

Long by picture save/share

INQUIRY

在线询盘 MORE+

联系人 *
手机 *
描述
Submit

Security Code

Refresh the code

Cancel

Confirm

Inquiry Content：

You have no items to require

Add Successfully

Continue To Visit Inquiry Now